Meltio Engine
Robot Integration
Large-scale Metal
3D Printing
Turn a robot arm into a metal 3D printing system with no inherent size constraints. The Meltio Engine Robot Integration is the perfect platform for large and complex 3D printing, repair, cladding and feature addition. The Meltio Engine integrates with any robot arm manufacturer and interface on the market.


Large-Scale Metal 3D Printing
The Meltio Engine integrates with any robot arm manufacturer and interface in the market.

Large-Scale
No inherent constraints when the working envelope is only limited by the size of the motion system.

Geometry Freedom

Cladding
Provide new capability to any robot arm by turning it into a metal 3D printing system.

Part Repair
Create highly complex parts with machining tolerances in the same process.
Technical Specifications
Dimensions (WxDxH):
390 x 700 x 1025 mm
Print Envelope (WxDxH):
Depending on the integration
System Weight:
142 kg
Laser Type:
6 x 200 W direct diode lasers
Laser Wavelength:
976 nm
Total Laser Power:
1200 W
Power Input:
208 / 230 V single phase or 400 V three phase
Power Consumption:
2 – 5 kW peak depending on selected options
Process Control:
Closed-loop, laser and wire modulation
Enclosure:
Laser-safe, sealed, controlled atmosphere
Cooling:
Active water-cooled chiller included
Wire Feedstock Diameter:
0.8 – 1.2 mm
Wire Feedstock Spool:
BS300 or Wire drums
Wire Materials
Stainless Steels:
Excellent strength and corrosion resistance.
Mild Steels:
Cheap and ductile, with unparalleled machinability and weldability.
Carbon Steels:
High impact strength, retain hardness at high temperatures.
Titanium Alloys:
Highest strength to weight ratio and corrosion resistance.
Nickel Alloys:
High versatility, outstanding heat and corrosion resistance.
Cooper & Aluminum:
Under Development.
Printhead Information
Custom mounting hardware for the deposition head and upper enclosure for electronics and related sensors.
Printhead Size (WxDxH):
202 297 X 784 mm
Printhead Weight:
15.5 kg
Key Integration Requirements
Payload of at least 45 – 60 kg ensures that the robot can follow the additive toolpath precisely.
Position repeatability of ± 0.06 mm according to ISO 9283.
At least 8 Digital I/O configured according to “Communications Protocols Robot Meltio Engine”.
When using OPC DA or Socket as the default communication protocol, Meltio recommends a total of 16 Digital I/O.
The robot and the ositioner must be installed, configured, and calibrated before the Meltio Engine Integration.
Possibility to add safety integration (depending on the integration)
Laser-safe robot cell with a security circuit between the robot controller, the Meltio Engine, and the cell door interlock.
The integrator is responsible for the correct installation and operation of the security system.
*A laser safety enclosure and safety interlocks for the robot cell are not included. These additional hardware items are to be sourced by the integrator or end user customer because they will depend on the final application and installation facilities.
Upgrades and Accessories
Dual Wire:
This option allows to 3D print two wire materials sequentially with very quick wire switches.
Hot Wire:
Programmable power supply that preheats the material to increase the deposition rate.
Laser Alignmet System:
It allows users to calibrate Meltio’s multi-laser deposition head accurately and effortlessly prior to every print.
Meltio Robot Applications

Rotary Screw Compressor
SS316L
Size:
75 x 75 x 230 mm cladded
Weight:
3 kg
Print Cost:
$ 62.83

Pipe Manifold
SS316L
Size:
205 x 360 x 473 mm
Weight:
5 kg
Print Cost:
$ 142.02

Spherical Tank
SS316L
Size:
500 Ø mm
Weight:
30 kg
Print Cost:
$ 433.07

Meltio Space Software
This toolpath generator software is specifically developed for accelerated adoption of Meltio technology, revolutionizes the field of robotic additive manufacturing. With its intuitive design, users can quickly adapt to and leverage the benefits of robotic additive manufacturing without requiring expertise in robotics or programming.


Laser Alignment System
The Laser Alignment System is a product developed by Meltio to aid the adoption of our state-of-the-art wire-laser deposition technology as well as to ensure print process reliability, and enhance user experience.

Meltio Materials
Meltio’s Laser Metal Deposition process achieves exceptional material mechanical properties using single wire and dual wire. Choose the ideal welding wire for your application: unlimited third-party commodity material or qualified Meltio Wire Materials that secure the user experience.


"There are A LOT of 3D printing products on the market right now, but, in terms of commercial potential…no one is close to Meltio."
Michael J K - Disrupting Hedge Funds
"To get a print quality of this level using DED clearly represents the huge efforts made by your team. Great going... best wishes."
Pravin Kumar - Postdoctoral Fellow
"Two excellent introductions to further develop the ecosystem for efficient wire deposition 👍"
Steve Cox - 3D Technologies Consultant
Meltio Engine Robot Integration
Receive a tailor-made offer within 1 – 2 business days.
